Single Row

Using Single Row

The Single Row function allows you to stitch a single row of patterns. 

Take the machine head to the starting point of the boundary. Tap Add Point. Once the first point is added proceed to move the machine head to the next point and tap Add Point until you have drawn the boundary. Repeat this process until the boundary has been drawn. If you add a point in the wrong place tap Undo to erase that point. If you want to quit the process tap End Project.After adding the fourth point, Elevate will automatically close the boundary and take you to your Pattern Manager. Scroll through the interactive Pattern Manager to find a pattern. Tap on the pattern of your choice to see the Pattern Details. Tap on the magnifying glass at the top right of the screen you will be able to search for pattern names, keywords, etc.

After selecting the pattern of your choice, you can view the Pattern Details. Tap the Orange Checkmark to select the pattern.Once the Orange checkmark is selected, Elevate will calculate the number of repeats needed to fit the boundary.

If   you want to change repeats, size, spacing, etc. tap Edit. If you want to change patterns tap the Heart to return to the pattern manager. After edits are complete, tap the Orange Checkmark to continue.

Whenever you are ready to begin quilting tap Start and the machine will proceed to move to the start point of the pattern.

The machine will take a single stitch at the start point and prompt you to pull the bobbin thread up. Hold the top and bottom threads. Tap Continue. The machine will begin to take tie off stitches and start stitching the selected pattern.

As the machine stitches the selected pattern on the quilt it will change from black to red. If you need to pause stitching Tap Pause and the machine will pause. Tap Resume when you are ready for the machine to resume stitching.

When stitching is complete Elevate will prompt you to pull up the bobbin thread. Pull up bobbin thread by moving the machine to the side, grabbing the top thread, move the machine back to the end point, and taking a single stitch. To take a single stitch use any one of your handle bar switches (Vision models) or the black switch on the left handle bar (Plus models). Cut the threads. Tap Continue to proceed. To exit the function, tap End Project.