Gammill Forum

Statler Quilting (for Statler owners only) => Statler Maintenance => Topic started by: Cynthia Weisz on July 04, 2016, 03:02:18 PM

Title: Belts that control the X and Y
Post by: Cynthia Weisz on July 04, 2016, 03:02:18 PM
After I turn on the machine and go into CS, my machine's belts are moving back and forth a little.  What causes this and do I have problem that I can't fix.
Title: Re: Belts that control the X and Y
Post by: Jo Ann Gruber on July 04, 2016, 10:53:45 PM
Sounds like it may be your Power Assist.  You can turn it off or calibrate it.  Both of these options can be found under the "Tools" menu.