Recent Posts

Pages: 1 ... 8 9 [10]
CreativeStudio / Updates for CS 6.0
« Last post by Patricia Harvey on March 22, 2017, 12:11:25 AM »
Are there any updates for CS 6.0?  If so where are they located?
CreativeStudio / Re: Up Grades
« Last post by Patricia Harvey on March 21, 2017, 09:15:19 PM »
Thank you so much.  I thought that was how it should be done but was afraid of getting a virus.  I do have anitvirus protection as well as antispyware so it should be fine. 
Again, Thank you so much.
CreativeStudio / Creative Studio 7 Requirements
« Last post by Bill on March 16, 2017, 10:51:25 PM »
     I have been a lurker since 2005 and never saw the need to post. We had the best quilter available. Everywhere we looked at quilt machines they said it's as good as a Gammill. Updates were included but the price was high. Gammill was the Best.  The service was and still is number 1 and the help is great.
     I was excited to see a new update until I saw Gammill was taking a path away from what we paid for and were promised by our dealer, sadly who is no longer with us, and the company in Columbia, Mo.
     When computers were not available and you gave out specs and directions. We followed and upgraded to keep currant. Having to buy a new computer at this time severely upset me when we have one running window 8. At one time you were going to charge for computer time which would be fine. The company has to make a profit.
     I can see where you were going to be able to come into and take it over where you would need a cretin specs  but you never did that.  That would have been worth the money.
     I would appreciate if you would make it where we can keep the equipment we have.  A minimum spec has to be had but there are many of us who have geared up. Basic computer service can be had locally.
This is my opinion. Please contact me if you have questions.    Thanks  Bill

CreativeStudio / Re: Up Grades
« Last post by on March 16, 2017, 09:32:07 AM »
Patricia -- Do you have another computer/laptop ?  If so, you'd download using that computer/laptop, then copy the upgrade information onto a USB/Thumb drive.    You'd then use the USB/Thumb drive to load it onto the Statler.
CreativeStudio / Re: Dreaden Plate and Point to Point
« Last post by Patricia Harvey on March 14, 2017, 11:38:38 PM »
Thanks.  I did do as you suggested and it worked beautifully.
CreativeStudio / Up Grades
« Last post by Patricia Harvey on March 14, 2017, 11:35:45 PM »
My dealer told me not to connect my Creative Studio & Gammill to the internet or use WiFI.  How do I get the upgrades for my CS6? :-\ I know this sounds Stu--d but I really don't know how to do this.
Machine Maintenance / Re: problems winding bobbins on stand alone winder
« Last post by shandibrinkman on March 08, 2017, 10:56:52 AM »
Tech support would be happy to troubleshoot the issue. Please contact them at your convenience at 900-659-8824 ext. 1
Thank you!
Machine Maintenance / problems winding bobbins on stand alone winder
« Last post by foothillsquilterie on February 25, 2017, 10:25:43 PM »
I'm having problems with some bobbins winding halfway then stopping.  Others wind up fine.  All are fairly new.  Is my problem the bobbins, or the bobbin winder.  I also have trouble with the tensions number jumping around when using the Tova gauge, and found a site that said the bouncing could be caused by a poorly wound bobbin.  Any ideas would be greatly appreciated!
CreativeStudio / Re: CS5 & 6 upgrades
« Last post by Jo Ann Gruber on February 10, 2017, 01:05:51 AM »
If your controller is a Mod 3, CS 4.2 was the last version to support Mod 3 controllers. 

If you're running on a Windows 7 or Windows 8 computer and have a newer controller, you should be able to go from CS 4.2 to CS 6.0 without an issue.  You will need to check your firmware first though.  If it is out of date, you will need to order a firmware update kit.
Retreats & Events / Upcoming Educational Events
« Last post by shandibrinkman on February 08, 2017, 04:42:11 PM »
Below are upcoming educational events. Also, we have updated our 2017 list of shows at

March 9 – 11, 2017  PC Needle Retreat
 The Old Dome Meeting Hall, Riverton, Utah
 Learn more about CreativeStudio at this event featuring Certified Instructor Joan Knight. This event is hosted by Cindy Gerber-Chavez and Paula Everill.

March 23 – 26, 2017 East Coast Gammill/Statler Retreat
 Wyndham Virginia Crossings, Glen Allen, Virginia
 Receive up to 20 or more hours of education on Gammill and Statler longarm quilting machines. Classes are for both computerized Statler by Gammill and hand guiding Vision customers.
 Hosted by: Threads Run Thru It

May 14-21, 2017 Set Sail with Statler
 Royal Caribbean’s Liberty of the Seas departing from Galveston, Texas
 Sail with us on a seven-day Western Caribbean Cruise. This trip includes three days of education at sea along with three beautiful days in tropical ports. Enjoy education with your fellow Statler users in relaxing and tropical atmosphere.
 Hosted by Gammill

June 22 – 24, 2017 SUGAR (Statler Users Group and Representatives)
 The SUGAR Conference will offer three days of classes for every level of quilter (beginners to experienced) by talented Statler instructors, a stunning display of machine-quilted quilts and special exhibits, a vendor mall of quilting-related products, and much more.
 Kansas City, MO
 KCI Expo Center

Pages: 1 ... 8 9 [10]