Recent Posts

Pages: 1 ... 6 7 [8] 9 10
71
CreativeStudio / RAM
« Last post by Jane S on April 29, 2017, 09:01:53 AM »
Is is possible increase RAM to my original Gammill computer and still have CS7 run.
I purchased in 2013 and no upgrades needed to run CS6.
72
Tools and Accessories / Re: Quick change hopping feet
« Last post by shandibrinkman on April 13, 2017, 05:26:37 PM »
Hi! I just added a post about them :)
And, we released a demo video today!
https://www.youtube.com/watch?time_continue=1&v=7MLD2QyG6fw
73
Tools and Accessories / Quick Change Foot
« Last post by shandibrinkman on April 13, 2017, 05:26:00 PM »
Introducing the Gammill quick change foot! No matter what your project, Gammill now has a foot to make your quilting shine! This set from Gammill features a quick change adapter that allows feet to be changed quickly without tools. Contact your local Gammill dealer to preorder http://gammill.com/our-dealers/dealer-locator/

 

SPOON FOOT

No need to worry about damaging your quilt when using lofty or bulky material. This foot allows you to glide quickly over applique, batting, and more.

OPEN TOE FOOT

Allows viewing of the needle in motion. Great for precision work such as outlines or stitch in the ditch.

COUCHING FOOT

Add a decorative touch to your quilting. Use with yarn, cording, embroidery thread, etc.

TRAPUNTO FOOT

Perfect for appliqué or trapunto work.

RULER FOOT

For use with ¼” rulers and templates


http://gammill.com/quick-change-foot/

74
Announcements From Gammill / Quick Change Foot
« Last post by shandibrinkman on April 13, 2017, 05:25:11 PM »
Introducing the Gammill quick change foot! No matter what your project, Gammill now has a foot to make your quilting shine! This set from Gammill features a quick change adapter that allows feet to be changed quickly without tools. Contact your local Gammill dealer to preorder http://gammill.com/our-dealers/dealer-locator/

 

SPOON FOOT

No need to worry about damaging your quilt when using lofty or bulky material. This foot allows you to glide quickly over applique, batting, and more.

OPEN TOE FOOT

Allows viewing of the needle in motion. Great for precision work such as outlines or stitch in the ditch.

COUCHING FOOT

Add a decorative touch to your quilting. Use with yarn, cording, embroidery thread, etc.

TRAPUNTO FOOT

Perfect for appliqué or trapunto work.

RULER FOOT

For use with ¼” rulers and templates

Visit http://gammill.com/quick-change-foot/ for more information.
75
CreativeStudio / Creative Studio 7
« Last post by Renee Krbec on April 11, 2017, 10:00:29 PM »
As everyone, I am excited about the new creative Studio 7.  I think that everyone should remember that the program creative Studio 6 is still a fabulous program. Anytime there is change it can pose problems. With all that, I am so excited I can hardly wait for Creative Studio 7 full launch. 

And has anyone seen the new quick-change hopping feet? I think they sound fabulous. I can't wait to get my hands on them.  I just saw a small segment on you tube and I want them too!

Thank you Gammill!   Wow!  I love my Statler.
76
Tools and Accessories / Quick change hopping feet
« Last post by Renee Krbec on April 11, 2017, 09:29:29 PM »
I just ordered these new hopping feet!  But I didn't see any announcement on this board.  I was wondering why?

Thank you!  I am sure that I am going to love them!
77
Announcements From Gammill / Fall in My World” Statler Challenge
« Last post by shandibrinkman on April 05, 2017, 11:17:03 AM »
“Fall in My World” to be displayed at AQS QuiltWeek events in 2017-2018

For more information and to download an entry form visit gammill.com/fallinmyworld

Gammill, Inc. invites Statler users to complete a submission for the “Fall in My World” Challenge. Three winners will receive cash prizes and finalists in the competition will be displayed at five American Quilter's Society QuiltWeek events in 2017 and 2018. It is estimated approximately 70,000 people will view the Statler Challenge at the following AQS QuiltWeek events:

Grand Rapids, Michigan (August 2017)
Fall Paducah, Kentucky (September 2017)
Des Moines, Iowa (October 2017)
Daytona Beach, Florida (February/March 2017)
Lancaster, Pennsylvania (March 2018)

Gammill will award three prizes in the competition. A Grand Prize of $1,000, a First Place prize of $500 and a Second Place $250 prize. The exhibit of finalists, as well as other selected quilts, will be on display at other Gammill events following the AQS shows. The winners will be announced at the Fall Paducah show in September 2017.

Official Rules
Finished quilt size: 24” x 24”
Theme: “Fall in My World”
Quilts must be quilted on a Statler by Gammill.
At least 75 percent of the quilting must be done by computerized quilting. Up to 25 percent may be hand guided.
Embellishments may be added such as threads, ribbon, beads, embroidery, etc.
Finished quilts must have a top, middle and backing. Maximum thickness: 1 inch
Quilts must be submitted with the official entry form.

Submitting your quilt
Please submit your quilt and entry form to Gammill by June 15, 2017.
Mail quilts to:
Gammill
Statler Challenge
1452 Gibson Street
West Plains, MO 65775

Quilts will not be returned to owners until late 2018.
78
CreativeStudio / Re: visability of new icons
« Last post by shandibrinkman on April 04, 2017, 11:02:24 AM »
In the full version of CreativeStudio 7.0 when you use the keypad at the head of the machine to mode through icons, a screen will appear with a large display of the icon that is selected and the ones to each side. This feature makes it more simple to see and select icons from the machine head. You can see a sample of what this looks like at https://www.facebook.com/gammillquilting Thanks!
79
CreativeStudio / visability of new icons
« Last post by Jane S on April 01, 2017, 06:02:25 PM »
I dont know about anyone else, but since all the icons are the same ugly color and smaller than the old Icons, I KNOW that I will not be able to see them when I am at the opposite end of the table!
What does everyone else think?
80
CreativeStudio / Re: unable to import encrypted patterns
« Last post by Jane S on March 31, 2017, 06:02:39 PM »
answer is on Gammill's latest post thanks regarding pattern manager
thanks
Pages: 1 ... 6 7 [8] 9 10