Recent Posts

Pages: [1] 2 3 ... 10
CreativeStudio / Tie off stitches not holding
« Last post by MaterialGirls on June 19, 2018, 05:09:57 PM »
Does anyone know what needs to be adjusted so the tie off stitches will hold.  It was intermittent, but today it has become constant.  I can just pull on the end thread and it comes out.  My tension looks great.
Statler Maintenance / CS7 Error Message
« Last post by monarchquilts on April 21, 2018, 03:06:20 PM »
I recently upgraded to CS7 from 4.2.  Big jump.  Today, my machine head went goofy and stitches in the same place without moving.  When I try to use the Cancel button, it will not stop, continues with the needle moving up and down as if I have touched nothing.  I'll admit, I have pressed the wrong buttons on the keypad, being a creature of habit, I know I have done this without looking.  I tried rebooting and now have an Error message on my screen before I say OK to open CS7.  The error message says Error in control.InputOccurred [Exception] = Object reference not set to an instance of an object.  I was doing P2P and used relocate all to go back to my block.  I'm sad as I only have the weekends to quilt!  Any ideas?
Statler Maintenance / CS7 on new windows 10 laptop
« Last post by Lynneablackman on February 16, 2018, 04:33:13 PM »
I want to put CS7 on a new laptop running windows 10.  Do I need to first download an earlier version of Creative Studio.
CreativeStudio / Gifted Patterns
« Last post by modernquiltdesigns on February 05, 2018, 07:15:02 PM »
When we updated to CS 6 there were a few additional patterns that were added as a gift for doing the upgrade. Are there any gifted patterns for the CS7 upgrade?

Thanks, Nadine
CreativeStudio / Re: HDMI monitor
« Last post by sbrinkman on January 22, 2018, 01:51:51 PM »
From our tech support department: The newest computers do not have an HDMI port on them. They do have a Display port. You can get a Display to HDMI adapter and use the Display port.  Please let us know if when can assist with anything further. Thank you!
CreativeStudio / HDMI monitor
« Last post by Suzie on January 17, 2018, 02:51:27 PM »
I just purchased a statler computer with cs7 from my dealer.  I am trying to set it up, but have a hdmi monitor which i use on my old computer.  does the statler computer (new one) have hdmi capability?     the VGA does not work well on my monitor images are horizontly stretched and it warps my vision.  no problem with how the hdmi monitor works.   I did try changing the resolution on the vga and it kept the horizontal stretch no matter what i chose, also no matter what resolution i used the cs7 or cs6 computer vga kept the stretch.  would appreciate any help on this, if it does not have hdmi capability on the cs7 computer can i install it with a board?
Introduce Yourself / Re: Good Morning
« Last post by Jo Ann Gruber on December 27, 2017, 12:27:20 AM »
Welcome, Linda!
CreativeStudio / border and corners
« Last post by Nut4sew on November 09, 2017, 11:51:30 AM »
Can any of you suggest a video to watch on chunking borders and corners in Creative Studio 7?  Thanks
CreativeStudio / Re: Connecting to INTERNET? Confused
« Last post by shandibrinkman on November 02, 2017, 09:09:31 AM »
Wonderful! I'm so glad you were able to get up and running with CS7.  Please let us know if we can be of further assistance. Happy quilting!
CreativeStudio / Re: Cloud
« Last post by FlyingQuilter on November 01, 2017, 10:27:59 PM »
I bought a USB to Ethernet connector (about $14)--I have a 3.0 USB port on my Statler computer/so it is faster, but if you have a 2.0 USB then you can use a cheaper adapter.  I then insert the USB to the slot/connect a (separate) ethernet cable into the adapter, and insert the other ethernet into the wall port for internet.  It worked really great, and now I detach it and keep it with my supplies for connecting when I need to.  (e.g. downloading new patterns, or downloading updates)  Hope that helps.  It is also what the technician suggested. 
You can also (if you have wireless) get a USB adapter for wireless, but I wanted to use an ethernet hard connection for this purpose.
Pages: [1] 2 3 ... 10