Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - shandibrinkman

Pages: 1 [2] 3 4 ... 7
16
Machine Maintenance / Re: thread break sensor
« on: May 30, 2017, 01:21:23 PM »
Hi Susan,
Try wrapping the thread another wrap around the thread break. If this does not work, please contact tech support so they can assist in troubleshooting the problem. Their number is 800-659-8224 ext. 1. Thank you!

17
CreativeStudio / Re: CS7 is going to be fantastic!
« on: May 23, 2017, 09:54:28 AM »
So glad to hear this and that you enjoyed the conference! Thank you for the feedback  :)

18
Tools and Accessories / Re: Quick change hopping feet
« on: April 13, 2017, 05:26:37 PM »
Hi! I just added a post about them :)
And, we released a demo video today!
https://www.youtube.com/watch?time_continue=1&v=7MLD2QyG6fw

19
Tools and Accessories / Quick Change Foot
« on: April 13, 2017, 05:26:00 PM »
Introducing the Gammill quick change foot! No matter what your project, Gammill now has a foot to make your quilting shine! This set from Gammill features a quick change adapter that allows feet to be changed quickly without tools. Contact your local Gammill dealer to preorder http://gammill.com/our-dealers/dealer-locator/

 

SPOON FOOT

No need to worry about damaging your quilt when using lofty or bulky material. This foot allows you to glide quickly over applique, batting, and more.

OPEN TOE FOOT

Allows viewing of the needle in motion. Great for precision work such as outlines or stitch in the ditch.

COUCHING FOOT

Add a decorative touch to your quilting. Use with yarn, cording, embroidery thread, etc.

TRAPUNTO FOOT

Perfect for appliqué or trapunto work.

RULER FOOT

For use with ¼” rulers and templates


http://gammill.com/quick-change-foot/


20
Announcements From Gammill / Quick Change Foot
« on: April 13, 2017, 05:25:11 PM »
Introducing the Gammill quick change foot! No matter what your project, Gammill now has a foot to make your quilting shine! This set from Gammill features a quick change adapter that allows feet to be changed quickly without tools. Contact your local Gammill dealer to preorder http://gammill.com/our-dealers/dealer-locator/

 

SPOON FOOT

No need to worry about damaging your quilt when using lofty or bulky material. This foot allows you to glide quickly over applique, batting, and more.

OPEN TOE FOOT

Allows viewing of the needle in motion. Great for precision work such as outlines or stitch in the ditch.

COUCHING FOOT

Add a decorative touch to your quilting. Use with yarn, cording, embroidery thread, etc.

TRAPUNTO FOOT

Perfect for appliqué or trapunto work.

RULER FOOT

For use with ¼” rulers and templates

Visit http://gammill.com/quick-change-foot/ for more information.

21
Announcements From Gammill / Fall in My World” Statler Challenge
« on: April 05, 2017, 11:17:03 AM »
“Fall in My World” to be displayed at AQS QuiltWeek events in 2017-2018

For more information and to download an entry form visit gammill.com/fallinmyworld

Gammill, Inc. invites Statler users to complete a submission for the “Fall in My World” Challenge. Three winners will receive cash prizes and finalists in the competition will be displayed at five American Quilter's Society QuiltWeek events in 2017 and 2018. It is estimated approximately 70,000 people will view the Statler Challenge at the following AQS QuiltWeek events:

Grand Rapids, Michigan (August 2017)
Fall Paducah, Kentucky (September 2017)
Des Moines, Iowa (October 2017)
Daytona Beach, Florida (February/March 2017)
Lancaster, Pennsylvania (March 2018)

Gammill will award three prizes in the competition. A Grand Prize of $1,000, a First Place prize of $500 and a Second Place $250 prize. The exhibit of finalists, as well as other selected quilts, will be on display at other Gammill events following the AQS shows. The winners will be announced at the Fall Paducah show in September 2017.

Official Rules
Finished quilt size: 24” x 24”
Theme: “Fall in My World”
Quilts must be quilted on a Statler by Gammill.
At least 75 percent of the quilting must be done by computerized quilting. Up to 25 percent may be hand guided.
Embellishments may be added such as threads, ribbon, beads, embroidery, etc.
Finished quilts must have a top, middle and backing. Maximum thickness: 1 inch
Quilts must be submitted with the official entry form.

Submitting your quilt
Please submit your quilt and entry form to Gammill by June 15, 2017.
Mail quilts to:
Gammill
Statler Challenge
1452 Gibson Street
West Plains, MO 65775

Quilts will not be returned to owners until late 2018.

22
CreativeStudio / Re: visability of new icons
« on: April 04, 2017, 11:02:24 AM »
In the full version of CreativeStudio 7.0 when you use the keypad at the head of the machine to mode through icons, a screen will appear with a large display of the icon that is selected and the ones to each side. This feature makes it more simple to see and select icons from the machine head. You can see a sample of what this looks like at https://www.facebook.com/gammillquilting Thanks!

23
CreativeStudio / CS7 Demo Version
« on: March 30, 2017, 10:32:29 AM »
https://youtu.be/yzCXFhYBSTE

We know you all have been anxiously awaiting the release of CreativeStudio 7.0 this month. Unfortunately, we have had unexpected challenges that mean the software will not be ready this March as previously planned. This new version of software is much different than any previous version of CS with so many new features and improvements. The addition of Pattern Management meant software programming changes on almost every level. Because this has led to unexpected delays we have made the very difficult decision to delay the full release of the software.
 The decision to not release in March was not made lightly. But, as a company, we would never want to release a software version that is not completely ready for you. We value you too much as customers. Your time, your quilts and your customers are too important to risk the chance that software might not work just as it should.

 Today, we are releasing to you a demo version of the software that can be operated in Stand Alone Mode (SAM). You will be able to operate this on any computer but you will not be able to use it to stitch out on your Statler. We know many of you are excited about CS7 and many have classes scheduled. This demo version will allow you to learn and become familiar with CreativeStudio 7.0. CreativeStudio 7 has so many great new features we are sure you are going to love it. We hope you will enjoy getting to know the software more through this demo version and will be as excited as we are for the full release.

 Visit http://gammill.com/cs7download/ to download

24
Announcements From Gammill / CreativeStudio 7.0 Demo Version
« on: March 30, 2017, 10:32:08 AM »
https://youtu.be/yzCXFhYBSTE

We know you all have been anxiously awaiting the release of CreativeStudio 7.0 this month. Unfortunately, we have had unexpected challenges that mean the software will not be ready this March as previously planned. This new version of software is much different than any previous version of CS with so many new features and improvements. The addition of Pattern Management meant software programming changes on almost every level. Because this has led to unexpected delays we have made the very difficult decision to delay the full release of the software.
 The decision to not release in March was not made lightly. But, as a company, we would never want to release a software version that is not completely ready for you. We value you too much as customers. Your time, your quilts and your customers are too important to risk the chance that software might not work just as it should.

 Today, we are releasing to you a demo version of the software that can be operated in Stand Alone Mode (SAM). You will be able to operate this on any computer but you will not be able to use it to stitch out on your Statler. We know many of you are excited about CS7 and many have classes scheduled. This demo version will allow you to learn and become familiar with CreativeStudio 7.0. CreativeStudio 7 has so many great new features we are sure you are going to love it. We hope you will enjoy getting to know the software more through this demo version and will be as excited as we are for the full release.

 Visit http://gammill.com/cs7download/ to download

25
CreativeStudio / Re: Feature Request - Align patterns on CAD screen
« on: March 27, 2017, 03:45:13 PM »
Thank you for this feedback!

26
Tech support would be happy to troubleshoot the issue. Please contact them at your convenience at 900-659-8824 ext. 1
Thank you!

27
Retreats & Events / Upcoming Educational Events
« on: February 08, 2017, 04:42:11 PM »
Below are upcoming educational events. Also, we have updated our 2017 list of shows at http://gammill.com/community/events-2/

March 9 – 11, 2017  PC Needle Retreat
 The Old Dome Meeting Hall, Riverton, Utah
 Learn more about CreativeStudio at this event featuring Certified Instructor Joan Knight. This event is hosted by Cindy Gerber-Chavez and Paula Everill.
 

March 23 – 26, 2017 East Coast Gammill/Statler Retreat
 Wyndham Virginia Crossings, Glen Allen, Virginia
 Receive up to 20 or more hours of education on Gammill and Statler longarm quilting machines. Classes are for both computerized Statler by Gammill and hand guiding Vision customers.
 Hosted by: Threads Run Thru It
 

May 14-21, 2017 Set Sail with Statler
 Royal Caribbean’s Liberty of the Seas departing from Galveston, Texas
 Sail with us on a seven-day Western Caribbean Cruise. This trip includes three days of education at sea along with three beautiful days in tropical ports. Enjoy education with your fellow Statler users in relaxing and tropical atmosphere.
 Hosted by Gammill


June 22 – 24, 2017 SUGAR (Statler Users Group and Representatives)
 The SUGAR Conference will offer three days of classes for every level of quilter (beginners to experienced) by talented Statler instructors, a stunning display of machine-quilted quilts and special exhibits, a vendor mall of quilting-related products, and much more.
 Kansas City, MO
 KCI Expo Center

 

28
Announcements From Gammill / CS7 Previews
« on: February 08, 2017, 04:40:36 PM »
See the latest previews for CreativeStudio 7.0 (coming in March 2017) at http://gammill.com/statler/creativestudio7/

29
Announcements From Gammill / CS7 & Gammill Cruise
« on: January 26, 2017, 03:26:58 PM »
Check out the circular array feature in CreativeStudio 7.0 https://youtu.be/d_7aCgafq64
The new software is due out in March 2017!

Also, register for the Set Sail with Statler Gammill Cruise by Feb. 1 to reserve your spot. Reservations begin at $1,099 for this all-inclusive trip.
Thank you!

30
Introduce Yourself / Re: Introduction
« on: January 26, 2017, 03:22:30 PM »
Welcome!!

Pages: 1 [2] 3 4 ... 7