Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - John Gruber

Pages: [1]
Quilting Tips / Re: Bobbin issue
« on: March 02, 2016, 02:16:04 PM »
The hook assembly should pass as close to the needle as possible without touching the needle.  Sometimes a tedious task.

Holding your tongue just right helps with this task. :D

Quilting Tips / Re: Bobbin issue
« on: March 01, 2016, 03:27:34 PM »
Three items to check come to mind.  1. Needle bar height.  Look for 3 quarters of the eye of the needle being visible with the needle in the lowest position.  2. Needle rotation.  Eye of the needle should be either straight on with the machine or may be up to 5 degrees rotated counter clockwise.  Scarf of the needle should be towards the rear of the machine.  3. Timing, check with your timing tool.  Rotation as well as distance between the needle and hook assembly. 

Normally standing on your head does not help. :)

Announcements From Gammill / Re: Gammill Premiere
« on: August 29, 2015, 11:05:10 PM »
Yes your Premier can be retrofitted to a Vision model which is stitch regulated.    You need to contact your local dealer for pricing.
Your local dealer can be located on the main web page.


Pages: [1]