Gammill Forum

Machine Maintenance => Machine Maintenance => Topic started by: Susan Parks on May 28, 2017, 04:29:59 PM

Title: thread break sensor
Post by: Susan Parks on May 28, 2017, 04:29:59 PM
I have a Vision 26-10.  When I restart stitching after bobbin cut, the thread break sensor alarms.  There is no thread break.  I have cleaned the lint, oiled the bobbin housing, changed bobbins (I use both Superior Threads pre-wound and my self-wound metal bobbins.) I even changed my bobbin casing and still the problem exists.  It seems to be happening more and more frequently.  Doesn't matter whether my machine is cool or been running a few hours. 
Title: Re: thread break sensor
Post by: shandibrinkman on May 30, 2017, 01:21:23 PM
Hi Susan,
Try wrapping the thread another wrap around the thread break. If this does not work, please contact tech support so they can assist in troubleshooting the problem. Their number is 800-659-8224 ext. 1. Thank you!