Gammill Forum

Machine Maintenance => Machine Maintenance => Topic started by: foothillsquilterie on February 25, 2017, 10:25:43 PM

Title: problems winding bobbins on stand alone winder
Post by: foothillsquilterie on February 25, 2017, 10:25:43 PM
I'm having problems with some bobbins winding halfway then stopping.  Others wind up fine.  All are fairly new.  Is my problem the bobbins, or the bobbin winder.  I also have trouble with the tensions number jumping around when using the Tova gauge, and found a site that said the bouncing could be caused by a poorly wound bobbin.  Any ideas would be greatly appreciated!
Title: Re: problems winding bobbins on stand alone winder
Post by: shandibrinkman on March 08, 2017, 10:56:52 AM
Tech support would be happy to troubleshoot the issue. Please contact them at your convenience at 900-659-8824 ext. 1
Thank you!