Machine loses its bearings
« on: January 11, 2017, 10:10:00 PM »
The machine begins stitching out patterns perfectly then after around 9 rows of stitching the all over pattern we replaced the bobbin.  When we go back to resume stitching & selecting the start again point the machine moves off line on its own about 1/4" & moves from my selected point throwing the resumed stitching line out of please......not sure how to rectify.  Have rebooted the machine but to no avail.
Thanks in advance

Re: Machine loses its bearings
« Reply #1 on: January 23, 2017, 12:05:50 PM »
Hi there,
You may need to do a relocate. That will let the machine know exactly where it is on the quilt and you'll be able to restart where you want to. Right now, the machine is moving to where it thinks the pattern is.
So if you do the relocate, that should remind the machine where it's supposed to be.
Please let me know if you have any questions on this.
Thank you,
Lis Groe
Gammill Customer Support Technician