Gammill Forum

Announcements from Gammill => Announcements From Gammill => Topic started by: shandibrinkman on July 20, 2015, 09:17:25 AM

Title: Instructions for the Statler Software Password
Post by: shandibrinkman on July 20, 2015, 09:17:25 AM
Need a password to access software upgrades?
- Register for the forum and select a username.
- Send an  e-mail to contact@gammill.com with your Statler controller number and forum username so we know you want to sign up for the Statler Forum.
- Once your account has been confirmed as a Statler owner, there will be a folder under the "Statler Quilting" section of the forum called "Statler Password Protected Information."
- A permanent post under this link contains the password for the software download site. We use this forum to send emails or make posts announcing product changes, updates and the password for all software upgrades.
* Please note: If you were a member of the previous Gammill forum, you can login in under your former username and select "forgot password" in order to complete a password reset. You will need to send an e-mail to contact@gammill.com to gain access to the Statler forum.
Thank you and we hope you enjoy the new forum!
Title: Re: Instructions for the Statler Software Password
Post by: mcmac on July 24, 2015, 03:03:42 PM
Everytime I send a email to contact@gammil.net it comes back undeliverable?  Is the address correct?  The meassage states domain not found.  Thankyou, Marilyn
Title: Re: Instructions for the Statler Software Password
Post by: shandibrinkman on July 24, 2015, 03:06:08 PM
Hi Marilyn,
The address is contact@gammill.net (two ls on Gammill). Please let me know if that doesn't fix the issue and we will try something different. Thank you!
Title: Re: Instructions for the Statler Software Password
Post by: mcmac on July 24, 2015, 03:13:36 PM
contact@gammil.net is still not going thru.  Any suggestions?  Thank you for yourassistance
Title: Re: Instructions for the Statler Software Password
Post by: shandibrinkman on July 24, 2015, 03:17:12 PM
I just sent an e-mail to the address on your account that you can reply to or feel free to message me through the forum and I will be happy to help!
Title: Re: Instructions for the Statler Software Password
Post by: mcmac on July 24, 2015, 03:19:01 PM
Thank you very much for your time!  Have a great day!  Marilyn
Title: Re: Instructions for the Statler Software Password
Post by: tgaarm3 on April 29, 2016, 04:06:52 PM
The address contact@gammill.net keeps bouncing. I need to finally upgrade my software to 6.0. I am registered but can not get the pass word and link to the new software. Miriam
Title: Re: Instructions for the Statler Software Password
Post by: shandibrinkman on April 29, 2016, 04:17:51 PM
Hi Miriam,
Please send the e-mail to contact@gammill.com. Thank you!
Title: Re: Instructions for the Statler Software Password
Post by: T J Speiser on April 30, 2016, 07:58:55 PM
contact@gammil.net is still not going thru.  Any suggestions?  Thank you for yourassistance
You need two L's in Gammill  ;)
Title: Re: Instructions for the Statler Software Password
Post by: jammystitches on September 15, 2016, 05:37:42 PM
How long does it take to become "confirmed" as a Statler owner? I don't see a folder under the "Statler Quilting" section of the forum called "Statler Password Protected Information."
Title: Re: Instructions for the Statler Software Password
Post by: kathyp on October 24, 2016, 10:29:23 PM
There is no folder under the "Statler Quilting" section of the forum called "Statler Password Protected Information."  I need the password to down load CS6 in stand alone mode to my laptop.  Not sure if I am doing something wrong.  I am brand new to this forum.  Can you help?
Title: Re: Instructions for the Statler Software Password
Post by: shandibrinkman on October 25, 2016, 09:58:42 AM
Hi Kathy,
Please send an e-mail with your controller number to contact@gammill.com and you will be added to the Statler Forum user group so that you may access those forum topics and the password instructions. Thank you!!